|
|
|||
|
Low pressure loss, Highly efficient |
|||
| For generating the hot-air Duct heater | |||
|
|
For
high temp. 50 - 350゚C Continuation usable max. hot-air temp. 350゚C Hot-air circulation max. temp. 350゚C Resisting pressure About 4.9kPa Overheat prevention sensor (Machine type contact output) is built Correspondence to the large gas capacity and low pressure blower (Sirocco fan etc.) |
||
|
Gas capacity abundant, Low noise |
|||
| Unit heater | |||
|
|
For
middle temp. 40 - 80゚C |
||
|
[Duct heater specification list ] |
|||||
| MODEL | Power supply | Heater capacity | Heater circuit number | Adaptation gas capacity at pressure loss 0.3kPa | Open price |
| DH-1 |
3-phase 200V |
2.5kW | 1 | 8.5m3/min | JPY 81,000 |
| DH-1L | 5kW | 1 | 7m3/min | JPY 104,000 | |
| DH-2 | 5kW | 1 | 17m3/min | JPY 116,000 | |
| DH-2L | 10kW | 1 | 14m3/min | JPY 174,000 | |
| DH-4 | 10kW | 1 | 34m3/min | JPY 162,000 | |
| DH-4L | 15kW | 1 | 28m3/min | JPY 278,000 | |
| DH-6 | 15kw | 1 | 51m3/min | JPY 208,000 | |
| DH-8 | 20kW | 2 (10kW×2) | 68m3/min | JPY 249,000 | |
| DH-12 | 30kW | 2 (10kW×2) | 102m3/min | JPY 347,000 | |
| DH-18 | 45kW | 3 (15kW×3) | 153m3/min | JPY 630,000 | |
| DH-24 | 45kW | 3 (15kW×3) | 204m3/min | JPY 709,000 | |
|
[Unit heater specification list ] |
||||||
| MODEL | Power supply | Heater capacity | Blower output | Max. gas capacity | Discharge temp. ΔT | Open price |
| UHPF-25 | 3-phase 200V 50/60Hz | 5kW | 25W | 15/17m3/min | 16/15゚C | JPY 126,000 |
| UHPF-40 | 10kW | 200W | 58/62m3/min | 8.5/8.1゚C | JPY 246,000 | |
Specification are changed without that tells to improve performance.
|
|
| Catalog of this product is ... |
Get the catalog just now |
Operation manual of |
Selection of the hot-air |
|||||||||||
| |
|
|||||||||||||