Multi-controller was upgraded !!
　

 　
 

　Heater for generating the high temp. and high pressure hot-air

　New   Spot-heater

Gas is heated quickly from the normal temp. to high temp.!
 Max. discharge temp. is 800ﾟC ,   Resisting pressure is 0.49MPa.

　
 Industry first ! Type that A-sensor and B-sensor were incorporated. (All type)
　

MODEL SH01 (Synthesis photo)

MODEL SH31 (Synthesis photo)

　

　
　 　
　

 Specification
　 Model Type Heater capacity
/ Voltage (Single-phase)		 Usable gas capacity Open price Common specification 　
SH01 1100-035K 350W/100V About 5 - 120L/min JPY33,600

　* Max. hot-air temp. is 800ﾟC.

　* Hot-start max. temp. is 500ﾟC.　
　　　　　
　* A-sensor (For detecting hot-air temp.)　
　　It is incorporated to the heater element.

　* B-sensor (For hot-start, and  heater
      snapping of a wire prevention)　
   　It is incorporated to the heater element.

　* Temp. of supply air is 0 - +70ﾟC.
　　　　　
　* Resisting pressure is 0.49MPa.
　　　
　* Accessories
　　　Adiabatic cover (SH11, 21, 31)
　　   Wiring cord 300mm (SH05,11,21)

　* Proper auto-temp. controller is TRC202.
　
1100-055K 550W/100V
1100-07K 700W/100V
1200-055K 550W/200V
SH11 1100-08K 800W/100V About 10 - 420L/min JPY40,400
1200-06K 600W/200V
1200-08K 800W/200V
SH21 1200-1K 1000W/200V About 10 - 380L/min JPY45,200
1200-1.2K 1200W/200V
SH31 1200-1.5K 1500W/200V About 60 - 1000L/min JPY72,500
1200-2K 2000W/200V
1200-2.5K 2500W/200V
1200-3K 3000W/200V
　
　 　 　 　
　 New function installation ! Auto-temp. controller for spot-heater
 Multi-controller TRC202		 　
　


* Contact output terminal that the abnormal signal is output is installed with addition.
* Temp. control is improved and the performance of 100% of spot-heater was drawn.



　

 　
 Specification
 　
 　* Power supply　
　　　　　　Single-phase 100V or Single-phase 200V 50/60Hz

　* Heater control capacity　
　　　　　　Less than single-phase 2kW  (at 100V)
              Less than single-phase 4kW  (at 200V)

　* Max. load current 　
　　　　　　20A (Heater load)

　* Instructions accuracy　
　　　　　　800ﾟC plus minus 0.2% FS

　* Control output　
　　　　　　For heater control (Phase control)

　* Function 　
　　　　　　Outlet hot-air temp.  A-sensor  Normal - 800ﾟC
　　　　　　Hot-start temp.  B-sensor  Normal - 500ﾟC
　　　　　　Overheat prevention　temp.
                 (Heater snapping of a wire prevention)  B-sensor  700ﾟC fixed
　　　　　　ON/OFF of the heater by the outside signal
　　　　　　Change of the operation mode by the outside signal
                 (Hot-start / Normal operation)
　　　　　　With contact output terminal
                 (Selection from 5 mode of the output terminal function)
　　　　　　Temp. alarm function
　　　　　　Auto-tuning function

　* Open price
　　　　　　JPY98,0000
　

Specification are changed without that tells to improve performance.

　

Catalog of this product is ...

　 　 　

Get the catalog just now

 　 　 　

Operation manual of
this product is ...

　 　 　

Figure of this product is ...

　 　 　

Selection of the hot-air
 generator is ...

　
　

　 　 　

　 　 　

　 　 　

　 　 　

　
　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　 　

　

Return to Main menu

Contact us